(M)  s i s t e m a   o p e r a c i o n a l   m a g n u x   l i n u x ~/ · documentação · suporte · sobre

  Next Previous Contents

2. Display setup

We assume you have already adapted your Linux console and X11 configuration to your keyboard and locale. This is explained in the Danish/International HOWTO, and in the other national HOWTOs: Finnish, French, German, Italian, Polish, Slovenian, Spanish, Cyrillic, Hebrew, Chinese, Thai, Esperanto. But please do not follow the advice given in the Thai HOWTO, to pretend you were using ISO-8859-1 characters (U0000..U00FF) when what you are typing are actually Thai characters (U0E01..U0E5B). Doing so will only cause problems when you switch to Unicode.

2.1 Linux console

I'm not talking much about the Linux console here, because on those machines on which I don't have xdm running, I use it only to type my login name, my password, and "xinit".

Anyway, the kbd-0.99 package ftp://sunsite.unc.edu/pub/Linux/system/keyboards/kbd-0.99.tar.gz and a heavily extended version, the console-tools-0.2.3 package ftp://sunsite.unc.edu/pub/Linux/system/keyboards/console-tools-0.2.3.tar.gz contains in the kbd-0.99/src/ (or console-tools-0.2.3/screenfonttools/) directory two programs: `unicode_start' and `unicode_stop'. When you call `unicode_start', the console's screen output is interpreted as UTF-8. Also, the keyboard is put into Unicode mode (see "man kbd_mode"). In this mode, Unicode characters typed as Alt-x1 ... Alt-xn (where x1,...,xn are digits on the numeric keypad) will be emitted in UTF-8. If your keyboard or, more precisely, your normal keymap has non-ASCII letter keys (like the German Umlaute) which you would like to be CapsLockable, you need to apply the kernel patch linux-2.2.9-keyboard.diff or linux-2.3.12-keyboard.diff.

You will want to use display characters from different scripts on the same screen. For this, you need a Unicode console font. The ftp://sunsite.unc.edu/pub/Linux/system/keyboards/kbd-0.99.tar.gz and ftp://sunsite.unc.edu/pub/Linux/system/keyboards/console-data-1999.08.29.tar.gz packages contain a font (LatArCyrHeb-{08,14,16,19}.psf) which covers Latin, Cyrillic, Hebrew, Arabic scripts. It covers ISO 8859 parts 1,2,3,4,5,6,8,9,10 all at once. To install it, copy it to /usr/lib/kbd/consolefonts/ and execute "/usr/bin/setfont /usr/lib/kbd/consolefonts/LatArCyrHeb-14.psf".

If you want cut&paste to work with UTF-8 consoles, you need the patch linux-2.3.12-console.diff from Edmund Thomas Grimley Evans and Stanislav Voronyi.

In April 2000, Edmund Thomas Grimley Evans <edmundo@rano.org> has implemented an UTF-8 console terminal emulator. It uses Unicode fonts and relies on the Linux frame buffer device.

2.2 X11 Foreign fonts

Don't hesitate to install Cyrillic, Chinese, Japanese etc. fonts. Even if they are not Unicode fonts, they will help in displaying Unicode documents: at least Netscape Communicator 4 and Java will make use of foreign fonts when available.

The following programs are useful when installing fonts:

  • "mkfontdir directory" prepares a font directory for use by the X server, needs to be executed after installing fonts in a directory.
  • "xset fp+ directory" adds a directory to the X server's current font path. To add a directory permanently, add a "FontPath" line to your /etc/XF86Config file, in section "Files".
  • "xset fp rehash" needs to be executed after calling mkfontdir on a directory that is already contained in the X server's current font path.
  • "xfontsel" allows you to browse the installed fonts by selecting various font properties.
  • "xlsfonts -fn fontpattern" lists all fonts matching a font pattern. Also displays various font properties. In particular, "xlsfonts -ll -fn font" lists the font properties CHARSET_REGISTRY and CHARSET_ENCODING, which together determine the font's encoding.
  • "xfd -fn font" displays a font page by page.

The following fonts are freely available (not a complete list):

  • The ones contained in XFree86, sometimes packaged in separate packages. For example, SuSE has only normal 75dpi fonts in the base `xf86' package. The other fonts are in the packages `xfnt100', `xfntbig', `xfntcyr', `xfntscl'.
  • The Emacs international fonts, ftp://ftp.gnu.org/pub/gnu/intlfonts/intlfonts-1.2.tar.gz As already mentioned, they are useful even if you prefer XEmacs to GNU Emacs or don't use any Emacs at all.

2.3 X11 Unicode fonts

Applications wishing to display text belonging to different scripts (like Cyrillic and Greek) at the same time, can do so by using different X fonts for the various pieces of text. This is what Netscape Communicator and Java do. However, this approach is more complicated, because instead of working with `Font' and `XFontStruct', the programmer has to deal with `XFontSet', and also because not all fonts in the font set need to have the same dimensions.

  • Markus Kuhn has assembled fixed-width 75dpi fonts with Unicode encoding covering Latin, Greek, Cyrillic, Armenian, Georgian, Hebrew, Symbol scripts. They cover ISO 8859 parts 1,2,3,4,5,7,8,9,10,13,14,15 all at once. This font is required for running xterm in utf-8 mode. http://www.cl.cam.ac.uk/~mgk25/download/ucs-fonts.tar.gz
  • Roman Czyborra has assembled an 8x16 / 16x16 75dpi font with Unicode encoding covering a huge part of Unicode. Download unifont.hex.gz and hex2bdf from http://czyborra.com/unifont/. It is not fixed-width: 8 pixels wide for European characters, 16 pixels wide for Chinese characters. Installation instructions:
    $ gunzip unifont.hex.gz
    $ hex2bdf < unifont.hex > unifont.bdf
    $ bdftopcf -o unifont.pcf unifont.bdf
    $ gzip -9 unifont.pcf
    # cp unifont.pcf.gz /usr/X11R6/lib/X11/fonts/misc
    # cd /usr/X11R6/lib/X11/fonts/misc
    # mkfontdir
    # xset fp rehash
  • Primoz Peterlin has assembled an ETL family fonts covering Latin, Greek, Cyrillic, Armenian, Georgian, Hebrew scripts. ftp://ftp.x.org/contrib/fonts/etl-unicode.tar.gz Use the "bdftopcf" program in order to install it.
  • Mark Leisher has assembled a proportional, 17 pixel high (12 point), font, called ClearlyU, covering Latin, Greek, Cyrillic, Armenian, Georgian, Hebrew, Thai, Laotian scripts. http://crl.nmsu.edu/~mleisher/cu.html. Installation instructions:
    $ bdftopcf -o cu12.pcf cu12.bdf
    $ gzip -9 cu12.pcf
    # cp cu12.pcf.gz /usr/X11R6/lib/X11/fonts/misc
    # cd /usr/X11R6/lib/X11/fonts/misc
    # mkfontdir
    # xset fp rehash

2.4 Unicode xterm

xterm is part of X11R6 and XFree86, but is maintained separately by Tom Dickey. http://www.clark.net/pub/dickey/xterm/xterm.html Newer versions (patch level 109 and above) contain support for converting keystrokes to UTF-8 before sending them to the application running in the xterm, and for displaying Unicode characters that the application outputs as UTF-8 byte sequence.

To get an UTF-8 xterm running, you need to:

  • Fetch http://www.clark.net/pub/dickey/xterm/xterm.tar.gz,
  • Configure it by calling "./configure --enable-wide-chars ...", then compile and install it.
  • Have a Unicode fixed-width font installed. Markus Kuhn's ucs-fonts.tar.gz (see above) is made for this.
  • Start "xterm -u8 -fn '-misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso10646-1'". The option "-u8" turns on Unicode and UTF-8 handling. The font designated by the long "-fn" option is Markus Kuhn's Unicode font. Without this option, the default font called "fixed" would be used, an ISO-8859-1 6x13 font.
  • Take a look at the sample files contained in Markus Kuhn's ucs-fonts package:
    $ cd .../ucs-fonts
    $ cat quickbrown.txt
    $ cat utf-8-demo.txt
    You should be seeing (among others) greek and russian characters.
  • To make xterm come up with UTF-8 handling each time it is started, add the lines
    XTerm*utf8:   1
    *VT100*font:  -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso10646-1
    to your $HOME/.Xdefaults (for yourself only). I don't recommend changing the system-wide /usr/X11R6/lib/X11/app-defaults/XTerm, because then your changes will be erased next time you upgrade to a new XFree86 version.

A further patch which implements support for double-wide characters (mostly CJK ideographs) and combining characters, by Robert Brady <rwb197@ecs.soton.ac.uk>, is available from http://www.zepler.org/~rwb197/xterm/. It is based on xterm patch level 140 http://www.clark.net/pub/dickey/xterm/xterm-140.tgz and is best used with the following settings:

  *VT100*font:     -Misc-Fixed-Medium-R-Normal--18-120-100-100-C-90-ISO10646-1
  *VT100*wideFont: -Daewoo-Gothic-Medium-R-Normal--18-18-100-100-M-180-ISO10646-1

2.5 TrueType fonts

The fonts mentioned above are fixed size and not scalable. For some applications, especially printing, high resolution fonts are necessary, though. The most important type of scalable, high resolution fonts are TrueType fonts. They are currently supported by

  • XFree86 4.0.1; you need to add the line
        Load "freetype"
        Load "xtt"
    to the Modules section of your XF86Config file.
  • The display engines of other operating systems.
  • The yudit editor, see below, and its printing engine.

Some no-cost TrueType fonts with large Unicode coverage are

Bitstream Cyberbit

Covers Roman, Cyrillic, Greek, Hebrew, Arabic, combining diacritical marks, Chinese, Korean, Japanese, and more.

Downloadable from ftp://ftp.netscape.com/pub/communicator/extras/fonts/windows/Cyberbit.ZIP.

Microsoft Arial

Covers Roman, Cyrillic, Greek, Hebrew, Arabic, some combining diacritical marks, Vietnamese.

Downloadable; look on a search engine for ftp-able files called arial.ttf, ariali.ttf, arialbd.ttf, arialbi.ttf.

Lucida Sans Unicode

Covers Roman, Cyrillic, Greek, Hebrew, combining diacritical marks.

Download: contained in IBM's JDK 1.3.0beta for Linux, or directly downloadable as LucidaSansRegular.ttf and LucidaSansOblique.ttf from ftp://ftp.maths.tcd.ie/Linux/opt/IBMJava2-13/jre/lib/fonts/.

Download locations for these and other TrueType fonts can be found at Christoph Singer's list of freely downloadable Unicode TrueType fonts http://www.ccss.de/slovo/unifonts.htm.

TrueType fonts can be converted to low resolution, non-scalable X11 fonts by use of Mark Leisher's ttf2bdf utility ftp://crl.nmsu.edu/CLR/multiling/General/ttf2bdf-2.8-LINUX.tar.gz.

More information about TrueType fonts can be found in the Linux TrueType HOWTO http://www.moisty.org/~brion/linux/TrueType-HOWTO.html.

2.6 Miscellaneous

A small program which tests whether a Linux console or xterm is in UTF-8 mode can be found in the ftp://sunsite.unc.edu/pub/Linux/system/keyboards/x-lt-1.18.tar.gz package by Ricardas Cepas, files testUTF-8.c and testUTF8.c. Most applications should not use this, however: they should look at the environment variables, see section "Locale environment variables".

Next Previous Contents